Wolverine WorldRadio Bedienerhandbuch PDF herunterladen (Seite 9)

2.2 Turning on Your WorldRadio for the First Time

Preparing the WorldRadio for operation:

1. Place the WorldRadio at a flat surface.

2. Remove the packaging materials.

3. Place the WorldRadio at a location close to Ethernet LAN access.

4. Insert the batteries provided into the Remote Control device.

5. If you are accessing the Internet via wired Ethernet LAN, please proceed to 2.2.1 Connection via Wired

Configuration (LAN).

6. If you are accessing the Internet via wireless LAN, please proceed to 2.2.2 Connection via Wireless

Configuration (WLAN).

2.2.1 Connection via Wired Configuration (LAN)

1. You may access the Internet Broadband Network by plugging Ethernet Cable to the

back of the WorldRadio.

2. Connect the power cable to the WorldRadio and connect it to the power supply.

3. Wait for the WorldRadio to power up (it will take about 20 sec. to turn on for the first

time); and then the welcome message will be displayed.

4. When the WorldRadio is turned on for the first time, the Language menu will be

displayed. You may select the Language by rotating the TUNE knob clockwise or

counterclockwise; and then press the TUNE knob to select your language preference.

5. The WorldRadio will now start the Configuration Wizard. Press the TUNE knob to

proceed.

6. Press the TUNE knob again to enter the Wired Ethernet LAN setting.

7. Press the TUNE knob to select the Automatic (DHCP) for Network IP address setting.

PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 33 34

Keine Kommentare

Wolverine WorldRadio Bedienerhandbuch Seite 9